Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X [GPM023X]

Price:

USD$36.00

Brand:

GPM

Model:

GPM023X

GTIN:

4894538293050

Condition:

Brand New

Color Available:

Quantity:

Write a review

alt="Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X" title="Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X"

Description

This item is suitable for AXIAL SCX 10 Honcho, HPI Venture Toyota FJ Cruiser, GMADE Komodo, GMADE SAWBACK and AXIAL SCX10 II

The product includes :

31mm Hex Adapter for TRX4-2pcs
21mm Hex Adapter for any other models-2pcs
Stainless metal Pin 2x10-2pcs
5mm Spring Steel Shims-2pcs
5mm Metal Washer w.opening-2pcs
19mm metal Hex Socket Screws-2pcs
Metal Washer for GMADE models-2pcs
M4x2.5x11 Pin-2pcs
12x18x4 Bearings -2pcs

Product major function & usage:
To increase the weight of each wheel to support the wheel, enlarge the angle of crawling, especially when the car is searching into some low lying area landspaces, grab the bottom securely and smoothly drive back again to level.

This part is made with a bearing at the center with a delrin collar, the extra weight pendulum is created narrower at the top and wider in the bottom to let you crawl in numerous perspectives. The extra weight is kept downward so that the crawler is more grabby toward ground and in a position to crawl in a larger angle.

1. Suited to Traxxas TRX-4. Axial SCX-10 I & II. HPI Venture 116564
2. Suited to GMADE Sawback / Sawback 4LS / Komodo (The 2pcs of metal washers are for GMADE vehicles - place underneth a corner shaft hex pins)
3. This part has been set up onto the external case of the front & rear knuckle hands, specifically created by united states that will not occur into the initial framework.
4. The extra weight of solitary pendulum is 128 gram (excluding bearings and collars).
5. Two sets of hex wideners are provided. 31mm hex wideners for Traxxas TRX-4 that is 26mm wider than initial. 21mm hex wideners for Axial SCX-10 we / SCX-10 II; GMADE Sawback / Sawback 4LS / Komodo. HPI Venture 116564 which will be 15mm wider than initial.

6. The product must be properly used on tires with internal diameter 45mm, wheel shaft gap 5mm.
7. To utilize with TRX 4, insert the white delrin collars regarding the straight back side regarding the pendulum wheel with groove and use the screw pin to support the hex.
8. To make use of with Axial SCX-10 we & II, GMADE Sawback / Sawback 4LS / Komodo, HPI Venture 116564, insert the bearings on both edges, install hex straight on the metal pin.

Hot Brands

Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X [GPM023X]