Futaba 10CHG 10-Channel 2.4GHz/ R6208SB  [10CHG_c3]

• The 10CG: pro-level features at a sport-system cost.
• The 10CG is ideal for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features previously discovered just regarding the sophisticated Futaba systems.
• However it’s also a system that boasts benefits few other people can claim: 7-point throttle and pitch curves; 4 heli flight modes; a circular dozen factory-defined glider mixes; layouts for programming swash plate kinds; swash band; and logic switches that allow you to trigger a timer or other function by simply changing the positions of specific sticks or switches.

10CG System Overview:

• Dial ‘n Key™ development w/joystick
• Airplane, heli and glider pc software
• 2048 resolution
• Real-Time Response™
• Smart Change Technology™
• Fundamental & advanced level menus
• 15-model memory, expandable to 48 models*
• 10-character model & individual naming
• Assignable switches & dials/functions
• Model choose, copy, re-set
• Data transfer
• 2 proportional slider switches
• Fail-safe, sub-trims, servo reversing & EPA
• Digital trims & trim action, expo & dual/triple rates
• 160 x 72 backlit LCD w/adjustable comparison
• Servo monitor display
• Auxiliary channel display for 1-step function/switch assignment
• Model & system timers
• Complete functionality trainer system (cable required)
• Throttle cut, hold & idle down
• Mode 1-4 selectable
• Sticks w/length and tension corrections
  * needs optional 128K CAMPac Module (FUTM9408)

Airplane Features:

• 8 programmable mixes
• Elevator/Flap
• Throttle needle
• Aileron differential
• Flaperons
• V-tail
• Elevon
• Air brake w/elevator wait
• Ailevator
• 4-position snap roll switch
• 2 separate gyro settings
• 7-point throttle curve
• Flap trim 

Heli Qualities:

• 6 programmable mixes
• Hover/pitch
• Hover throttle
• 8 swash plate types w/graphics
• Swash AFR
• 5-point revo combining
• Gyro menu
• 7-point throttle & pitch curves w/delay
• High/low pitch setting
• Swash ring
• Throttle hold 3 idle-ups w/delay

Glider Features:

• 8 programmable mixes
• Butterfly/elevator (2)
• Elevator/flap
• Chamber mix
• Aileron/flap
• Aileron/rudder
• Flaperons
• V-tail
• 4-point offset
• Spoiler mix
• Single/dual flap servos
• 5 journey conditions
• 3 wing kinds
• Adjustable engine cut

Glider Features:

• 8 programmable mixes
• Butterfly/elevator (2)
• Elevator/flap
• Chamber mix
• Aileron/flap

R6208SB:

• R6208SB is a fresh S.Bus System 2.4Ghz tall Voltage Receiver from Futaba. It makes use of digital serial data communication technology to send control signals involving the receiver and servos utilizing S.Bus hubs and cables.
• The 10CG 2.4GHz may be the perfect system for the value-oriented pilot: providing far more than you’d expect for under you’d imagine.

Includes:

• Futaba 10CHG 2.4Ghz Transmitter
• R6208SB Tall Voltage Receiver
• Heavy-Duty Change Harness
• *No RX Battery

R6208SB Spec:

• Operating Voltage: 3.8V ~ 7.4 V
• Dimensions: 1-7/8 x 1 x 9/16" (47 x 24.9 x 14.3mm)
• Body weight: 0.5oz (13.8 g)