Futaba 12FGA 12-Channel (M1) PCM/ 40MHz/ R5114DPS/ 4xS9252  [12FGA_C1]

Here is the airplane variation that may default to airplane settings whenever powered up and it has a ratcheted throttle stick.

The Futaba 12FGA shares many features with all the 14MZ particularly Real-Time reaction with 2048PCM, completely Synthesized Receiver that runs in either Mode A (standard Mode) or Mode B (brand new Mode), Servo Grouping, Variable double prices and Quad-Bearing Gimbals.

QUALITIES:

• PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM
• 10 free (user programmable) mixes
• 24 preset model kinds, 8 heli swash types and 16 model types for fixed wing aircraft
• 6 kinds of no tail wing (winglet) in each airplane and glider
• Supports eight flight conditions (seven as well as the standard)
• FLASH-ROM memory for approximately thirty models
• 1882 model memory available with optional 1GB facts available separately, Six factory-set Variable Dual speed (VDR) curves may be assigned to virtually any function in every trip condition
• configuration
• Variable Dual prices (VDR) and Expo could be combined so that they are automatically triggered when a function is activated, no system blending required
• Dual Antenna Diversity (DAD)
• "Full Functionality" trainer system
• 255 x 96 LCD with adjustable comparison
• 7.2V 1700mAh NiMH transmitter battery
• R5114DPS Receiver;
• Functions in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may possibly occur Mode B (brand new Mode) might selected
• Through state-of-the-art Ball Grid Array (BGA) layered Computer board technology, this 14-channel synthesized receiver may be the globe's smallest. All pilots will appreciate exactly how effortless its
• WFSS (cordless Frequency Setting System) makes changing frequencies at busy airfields. It can be done from the transmitter without changing crystals.Servo Grouping;
• Multiple servos managing just one function are put up through transmitter then connected to in a different way adjustable receiver channels (even non-consecutively) without requiring another servo synchronizer for blending. Each servo's
• EPA may be adjusted individually from the transmitter-no split servo synchronizer requires for blending
• Quad-Bearing Gimbals for smoothest movement and reaction, stick tension and detent are adjustable
• Front mounted slider switches for easier access
• Seven color LED indicator

INCLUDES:

• 12FGA Synthesized Transmitter (not available individually) 40MHz Module
• 7.2V 1700mAh NiMH Transmitter Battery
• Battery Charger
• NiCd 1500mAh 4.8V Receiver Battery
• Four S9252 Servo
• R5114DPS Receiver
• High Quality Change Harness
• Woven Orange Neck Strap
• Instructions

SPECS:

Transmitter:

• Os: 2-stick, 12 channels, PCM-G3 synthesizer system
• Modulation: PCM-G3, PCM 1024, or FM/PPM switchable

Receiver:

• Receiving Frequency: US only 72MHz bands
• Intermediate Frequency: 10.7MHz & 450kHz
• Size: 2" x 1.5" x .65" (52mm x 37.5mm x 16.5mm)
• Power Requirement: 4.8V NiCd battery
• Present Drain: 75mA
• Body weight: 1.16oz (33g)

Servo:

• Speed: 0.14 sec/60?X @ 4.8V
• Torque: 92 oz-in (6.6 kg-cm) @ 4.8V
• Power: 4.8V (Futaba cannot suggest making use of 6V)
• Size: 1.6 x 0.8 x 1.4" (40 x 20 x 37mm)
• Body weight: 1.8oz (50g)