Futaba 6EXAP 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]

Price:

USD$127.00

Brand:

Futaba

Model:

6EXAP_c10

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

FEATURES:

Aileron, Elevator and Rudder dual rate switch - Use this switch to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses may be arranged you choose, but generally, when the switch is ��up�� the throws are greater (��high rate��) and when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial operates the servo attached to channel 6 into the receiver if your model has flaps this is the control utilized to operate them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to shift the basic or center place of every servo as labeled in the diagram.
Asking jack - Port for asking the transmitter batteries using the included battery pack charger.
On-off switch
INFORMATION INPUT lever - always replace the values associated with the different functions displayed regarding LCD screen.
Liquid-crystal display (LCD) - shows programming modes and values joined.
MODE key - always scroll through and show the ten or eleven(PCM) various functions.
SELECT key - Used to show the values the present function.
Throttle-cut switch - to make use of the throttle-cut function, reduced the throttle stick completely, then drive the throttle-cut key to totally shut the carburetor and shut of this motor.
Throttle/rudder control stick - Operates the servos connected to channel 3 (throttle) and channel 4 (rudder) within the receiver.
Trainer switch - Operates the trainer functions. To work as a trainer switch the transmitter should be connected to another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - change operates the servo linked to channel 5 in receiver should your model has retractable landing gear this is actually the control always expand and retract kit.
Antenna - Radiates signals towards the receiver. Never fly a model without completely extending the antenna or you may create interference to many other modelers and decrease operational sign array of the transmitter. The antenna could be removed and changed with another just in case it really is inadvertently broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]