Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]

Price:

USD$127.00

Brand:

Futaba

Model:

6EXAP_c4

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin rate switch - make use of this change to flip between two aileron, elevator and rudder control throw settings. The throws can be set up nevertheless you choose, but generally speaking, if the switch is up the throws are greater (higher rate) and when the switch is down the throws are less (low price). This switch additionally flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial operates the servo connected to channel 6 within the receiver if for example the model has flaps this is the control utilized to work them.Aileron/elevator control stick -Mounting point for optional throat band.
Trim levers (all) -Used to shift the neutral or center position of each servo as labeled in the diagram.
Recharging jack - Port for charging the transmitter batteries because of the included battery pack charger.
On-off switch
DATA INPUT lever - regularly change the values regarding the various functions exhibited regarding the LCD display screen.
Liquid-crystal display screen (LCD) - Displays development modes and values entered.
MODE key - regularly scroll through and show the ten or eleven(PCM) different functions.
PICK key - always show the values the present function.
Throttle-cut switch - To use the throttle-cut function, reduced the throttle stick all the way, then Push the throttle-cut key to completely close the carburetor and shut associated with the motor.
Throttle/rudder control stick - runs the servos attached to channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To operate as a trainer switch the transmitter needs to be attached to another transmitter via. a trainer cord (available individually).
Retractable landing gear switch/Channel 5 - change operates the servo linked to channel 5 in receiver in case your model has retractable landing gear here is the control regularly extend and retract the apparatus.
Antenna - Radiates signals on receiver. Never travel a model without fully extending the antenna or perhaps you may create interference to many other modelers and decrease operational sign array of the transmitter. The antenna may be removed and changed with another in the event it really is unintentionally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R146IP Receiver
Change Harness
Manual

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical organization.
Os: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
Power supply: 9.6V NT8S600B Ni-Cd battery or 12V alkaline battery
Current drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]