The Storyline of this Drone Race:
Kyosho’s Drone Racer is fantastic.
A group of 3 previous mischievous guys are now around forty years of age and senior. They will have grown into the males they as soon as seemed around as children, high in work and home duties. It works late; get trapped in hustle of city life, and maintain otherwise normal healthy lifestyles. Fast ahead on dawn regarding the Saturday which they are going to get together again for the first time in ages. Planning their Drone Racers and loading the car along with other gear (program), and then GO!
This new Generation, Drone Racer glides above the ground.
Unlike current drones which can be hard to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control utilizing ultrasonic sensors that eliminate the frustration of learning complicated traveling methods. You can now experience the enjoyable of drone traveling at your own pace.
Control with a pistol-grip R/C system, The KT-231P+ Transmitter
This Readyset includes everything required. Open the package then charge the battery to start traveling.
Includes the latest 2.4GHz Syncro KT-231P pistol-grip transmitter featuring advanced aircraft-like instrument panel. Flying height modification switch is installed in the foot of the transmitter hold.
Battery : 3.7V-1000mAh Li-Po battery pack, Flight time /10 mins approx.
USB Charger : Includes USB auto-cut charger. Charging time / 1-2 hours, (depending on USB power supply output)
USB Cable : Includes USB cable in order to connect the drone to your own computer.
New Technology: Dogfight only 35cm over the ground. Rates over the ground just like a Hoverboard. Newly developed drone technology.
The DRONE RACER has advanced ultrasonic sensors,
6-axis gyroscope (3-axis angle rate sensors, 3-axis acceleration sensors),
barometric force sensor and four quick response mini coreless engines.
Rate switching function provides an option between “Easy Mode” and “Active Mode” and
provides direct intuitive journey control.
LOW HEIGHT FLYING CONTROL
Altitude is automatically maintained with ultrasonic and barometric stress sensors. Altitude environment of 35cm or 60cm may be chosen with a switch on R/C system and one-touch control is employed for takeoff, hovering and landing. Some individuals may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) eliminates these barriers so somebody will enjoy the fun of flying drones. *according to Kyosho research
Flies over any area, even over water. Maintains constant altitude of 13 ins (23 inches) using ultrasonic sensors.
All Terrain: Grass/Ground/Water/Mud/Snow
VPUS, VARIABLE PROPELLER UNIT CONSTRUCTION
H-type chassis with separate top and lower parts and left-right propellers linked on a single propeller supply permit the propeller product angle become changed between: 0°, 10°, 20°. Make use of more security (0°/ max rate : 30km/h) or even more rate (20°/ maximum speed : 34.5km/h) as a racing weapon.Includes Arm owner 0°,10°,20°.
KYOSHO DRONE CONTROL MIXING SYSTEM
Optimal roll and yaw blending match control through the steering wheel.
K-DCMS, Kyosho Drone Control Mixing System
DRONE BACKWARD CONTROL
Uses similar control motion as a motor vehicle.
New Drone Safty,Kyosho DRONE RACER is not susceptible to the revised Japanese aviation legislation. This product are enjoyed by anybody.
The DRONE RACER isn't made for high altitude performance, however for people to enjoy flying properly of their field of eyesight close to the ground. A complete safety system includes: detachable propeller guards; “PROPELLER CAR AVOID SYSTEM” that activates in case you lose control regarding the throttle; “ANGLE CRISIS AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT CRISIS CAR AVOID SYSTEM” in case the air signal is lost. Weighing just 130g, the DRONE RACER just isn't at the mercy of the Japanese aviation legislation and that means you can fly freely anywhere you prefer (except in restricted areas). *as at aviation rules tenth December 2015
Fast, beautiful and much more effective. Sophisticated masterworks.
Model lineup features two human anatomy design designs, the G-ZERO and ZEPHYR,
which are centered on a futuristic impression of automobile utilizing the slim form and
rear wings related to formula racing vehicles.
Bright LEDs illuminate the fuselage. LEDs can be utilized as drone identifiers when racing.
Full color LED installed on front side propeller units allows a variety from 6 colors. You'll choose your favorite luminescent color to use as an identifier when race.
Red : flashing suggests low battery pack warning, whenever lit shows safety function is released & can operate as end lamp
Yellow : transmitter not connected = RADIO EMERGENCY AVOID
Green: blinking shows detecting horizontal, whenever lit suggests willing to takeoff and security function is activated
Blue : gyro calibration happening
2 x LED on front and 1 x LED on back set up
For simple front-rear recognition the leading mask features 2 bright white LEDs and the tail features red LED.
Infrared LED set up within the cockpit works together a particular lap counter.
Extra features consist of: pairing key; LED color modification; calibration correction;setting mode changing switch;5V external power slot; extended Light-emitting Diode port, and micro USB terminal.
Includes group of free propellers (4). Never hesitate to completely take pleasure in the enjoyable of traveling!
Endless Possibilities
DRONE RACER SETTING MANAGER
DRONE RACER can connect with your (Windows) computer with all the included USB cable to regulate journey settings. Besides, an optional cable may also be used to hook up to an Android os terminal with a USB host function to modify settings.
Download the free (DRONE RACER SETTING MANAGER) to fully adjust to your chosen environment and generate the volume of fun.
Necessary for Process (Available Separately)
- 4 x AA size batteries for transmitter
- Computer with USB slot (for charging) or USB energy charger (if output is significantly more than 2A, complete cost are complete within 1 hour)
Specs:
- Length: 302mm (with guard)
- Width: 300mm (with guard)
- Height: 65mm
- Gear Ratio: 5 : 1
- Weight: 130g approx.
- Motor: 8.5mm coreless
- Battery: 3.7V-1000mAh
- Propeller: D5 x P4
- Journey Time: 10 min approx.
- billing Time: 1-2 hours (according to USB energy output)
- 30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle establishing)/38km/h approx. (when working with optional parts)
- Energy density: 318Wh/L (maybe not subjected PSE)
- Trip altitude: minimal 35cm/High 60cm approx. (environment may be changed making use of software program)
