Kyosho 30053DP - 1/18 EP Motorcycle MINI-Z MC-01 2.4GHz REPSOL Honda RC212V 2011 No.26  [30053DP]

E-gyro with precision environment optimizes driving stability over the entire speed range!
Enjoy running direct lines and full banking turns! Micro MOTO Racer is able to excite!

Kyosho captures the fascinating realm of the motorbike race into the palm of the hand because of the stunning realism associated with new MOTO Racer. MINI-Z quality and engineering guarantee performance that'll keep onlookers speechless since the motorist appears to control the bike with stability through right lines and deep banking turns. Integrating exactly the same theoretical driving control as a real bike, the steering control logic and driving control system permits the model to be maneuvered freely like no R/C race bicycle ever before. Amazing two-wheeled automobile stability has been accomplished because of the advanced E-gyro System featuring an in-wheel rotator from a brushless engine constructed into a corner wheel. Powerful motor drive provides efficient gyro impact to realize driving stability. Irrespective of speed, the E-gyro allows stable right line running and cornering. Also, separate RPM settings for low rate and high rate can be made on the E-gyro to prefer greater security or greater maneuverability. For example, the E-gyro's RPM are set at high RPM for greater security for driving at slow rates, and/or RPM could be paid off for easier banking turns at greater rates. The E-gyro can be set to fit your level of skill or nevertheless prefer. This combines with all the suspension systems on front and back to provide super smooth maneuvering. Also, with the newly created FHSS 2.4GHz R/C system, around 40 models is raced as well. The model is fully pre-assembled and Readyset includes Li-Po battery pack and charger. Merely add your own personal batteries toward transmitter and fee the included Li-Po battery pack to see the thrill of driving your race motorbike.

• Completely factory assembled Readyset.
• Two-wheel vehicle security combines with realistic finish in 1/18 scale.
• E-gyro RPM reacts to throttle input and realizes stable performance.
• Individual E-gyro RPM settings could be created for low and high throttle input.
• Loaded with suspension on front side and backside.
• Full bearing requirements include 10 ball bearings.
• Chassis height adjustment.
• Stepless adjustment of caster angle.