Kyosho 32523G - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Sierra Medium Gray  [KY-32523G]

In 2019 the entire world's most widely used mini RC series, known as the Kyosho MINI-Z, celebrated above 20 years of unmatched performance and scale realism inside hobby-grade RC category. The continuous quest for performance and development has resulted in the creation of a completely-new ‘MINI-Z 4x4’ design that delivers an all-new driving experience for RC fans of stripes, with superior overall design, driving performance and top-quality injection-molded scale human anatomy construction. A significant function of this MINI-Z 4x4 series is the greater focus of body information and quality of finish that even surpasses current benchmarks set by the MINI-Z. Your body normally molded with thicker product to higher resist crash harm from operation in rough landscapes. Integrating the exact same ladder- style framework of genuine 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would generally be two upper links into just one top A-arm to deliver maximum suspension system movement. A specially designed high-torque steering servo allows this device to put its elbows around into the difficult landscapes for exemplary performance into the toughest rock-crawler conditions. The high-torque 130-size engine brings out the beast in MINI-Z 4x4, particularly geared to run well into the low to medium speed varies common in crawling.

made to balance exquisite style, scale detail and superior driving performance, all the MINI-Z 4x4 requirements is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the stunning visual appearance. The Kyosho Mini-Z 4x4 may be the only mini crawler that delivers a full range of crawling performance in an inferior package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Fat 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 34.65:1/30.80:1/27.72:
• Front Tire Diameter 37.0mm
• Rear Tire Diameter 37.0mm
• Front Tire Width 12mm
• back Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• operating Time Approx. 60 minutes

KIT CONTENT

• Complete chassis with integral electronic devices.
• Factory-painted human anatomy filled with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 kinds of pinion gear spacers

REQUIREMENT TO RUN

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for chassis (Alkaline or NiMH)