Kyosho 32523IV - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Sierra Chiffon Ivory Metallic  [KY-32523IV]

In 2019 the entire world's top mini RC series, known as the Kyosho MINI-Z, celebrated a lot more than two decades of unmatched performance and scale realism into the hobby-grade RC category. The constant search for performance and evolution has generated the creation of a completely-new ‘MINI-Z 4x4’ design that provides an all-new driving experience for RC fans of stripes, with superior overall design, driving performance and high-quality injection-molded scale human anatomy construction. An important feature of this MINI-Z 4x4 show could be the greater focus of human anatomy detail and quality of finish that even surpasses existing benchmarks set by the MINI-Z. Your body can be molded with thicker product to higher resist crash damage from procedure in rough surface. Incorporating equivalent ladder- style framework of genuine 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would normally be two upper links into one upper A-arm to provide maximum suspension motion. A specially created high-torque steering servo allows this device to toss its elbows around in difficult landscapes for exemplary performance in the toughest rock-crawler conditions. The high-torque 130-size engine brings about the beast in the MINI-Z 4x4, specially targeted at run well in low to moderate speed ranges common in crawling.

made to balance exquisite style, scale detail and superior driving performance, all MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold individually). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the wonderful artistic appearance. The Kyosho Mini-Z 4x4 may be the only mini crawler that provides the full array of crawling performance in an inferior package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 39.60:1/34.65:1/34.65:1
• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 minutes

KIT CONTENT

• Complete framework with integrated electronics.
• Factory-painted human anatomy complete with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 kinds of pinion gear spacers

REQUIREMENT TO PERFORM

• 4 x AAA batteries for the transmitter
• 4 x AAA batteries for chassis (Alkaline or NiMH)