Kyosho 32523MB - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Brisk Blue Metallic  [KY-32523MB]

In 2019 the world's most widely used mini RC series, known as the Kyosho MINI-Z, celebrated a lot more than two decades of unmatched performance and scale realism within the hobby-grade RC category. The continuous pursuit of performance and evolution has resulted in the creation of a completely-new ‘MINI-Z 4x4’ design that provides an all-new driving experience for RC fans of all stripes, with superior general design, driving performance and top-notch injection-molded scale body construction. A significant feature associated with MINI-Z 4x4 show may be the greater emphasis of body detail and quality of finish that even surpasses existing benchmarks set by the MINI-Z. The human body can be molded with thicker product to higher resist crash damage from procedure in rough surface. Integrating equivalent ladder- design frame of real 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining just what would generally be two upper links into an individual upper A-arm to supply maximum suspension motion. A specially created high-torque steering servo allows this machine to toss its elbows around into the hard landscapes for exceptional performance in the most challenging rock-crawler conditions. The high-torque 130-size motor brings out the beast into the MINI-Z 4x4, specifically targeted at run well inside low to moderate rate varies typical in crawling.

built to balance exquisite style, scale information and superior driving performance, all the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold individually). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the wonderful artistic appearance. The Kyosho Mini-Z 4x4 could be the only mini crawler that delivers the full range of crawling performance in an inferior package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1, 39.60:1/34.65:1/34.65:1

• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 mins

KIT CONTENT

• Complete framework with built-in electronic devices.
• Factory-painted body filled with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 types of pinion gear spacers

REQUIREMENT TO PERFORM

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for chassis (Alkaline or NiMH)