In 2019 the entire world's most popular mini RC series, known as the Kyosho MINI-Z, celebrated more than 20 years of unmatched performance and scale realism inside hobby-grade RC category. The constant search for performance and evolution has resulted in the creation of a completely-new ‘MINI-Z 4x4’ design that delivers an all-new driving experience for RC fans of stripes, with superior overall design, driving performance and top-quality injection-molded scale human anatomy construction. An important function for the MINI-Z 4x4 series could be the greater emphasis of human body information and quality of finish that even surpasses existing benchmarks set by the MINI-Z. The human body can be molded with thicker material to higher resist crash harm from procedure in rough landscapes. Incorporating equivalent ladder- style framework of genuine 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system combining what would usually be two top links into just one top A-arm to deliver maximum suspension system motion. A specially created high-torque steering servo allows this machine to put its elbows around in hard landscapes for exceptional performance inside most challenging rock-crawler conditions. The high-torque 130-size engine brings forth the beast within the MINI-Z 4x4, specifically targeted at run well inside low to moderate rate varies common in crawling. Designed to balance exquisite design, scale detail and superior driving performance, most of the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the wonderful artistic appearance. The Kyosho Mini-Z 4x4 is the only mini crawler that delivers the full array of crawling performance in a smaller package.
● Adopts full-fledged solid axle links like the 1/10 scale models, ensuring the driving performance and wheel travel required for crawler models.
● Loaded with a specially tuned high-torque 130 engine. Additionally, the key gear device features a slipper clutch that protects the drive system by releasing torque whenever under heavy load.
● Features a high-torque servo created specifically for crawler models, with the capacity of supporting authentic crawling performance. The steering link optimization achieves the largest steering angle in Mini-Z history.
● Full bearing specification with a total of 18 ball bearings. Metal gears, known with regards to their durability, are utilized in parts that bear hefty lots.
● The "KT-531P" transmitter utilizes the FHSS 2.4GHz system and features a sponge in the controls to improve operability.
● Comes as a fully put together, ready-to-run model, needing only the insertion of batteries to start operation.
● An optional light set (MZW429R) can be set up at the top of this circuit board. The lights respond to throttle procedure, together with headlight's illumination period are modified freely—from constant lighting to blinking—via the transmitter's trim.
● Supports the individually sold gyro unit (MZW446), and just like the RWD/AWD show, manual adjustments could be made via the volume control.
● Loaded with popular BS Goodrich tires.
GR (Gazoo Racing) takes the currently solid off road performance with this world-famous SUV around a greater degree with strengthened suspension and higher level electronic settings. The front bumper and grille are exclusive to the GR Sport model.
The same ladder framework and multi-link rigid-axle suspension system widely used in popular 1: 10-scale off road models, is condensed into Mini-Z size the most articulation and gratification available in any mini RC truck.
The Mini-Z 4x4 incorporates a ladder frame design with metal vertical plates, in combination with various molded components, to provide the greatest stability of of rigidity and flex for superior performance and durability.
Solid front and rear axles feature links with metal rods and captured pole ends. Ring and pinion gears, as well as other gears and components, feature steel construction to withstand the heavy loads in toughest driving conditions.
the leading axle features ideal Ackermann geometry. Combined with advanced design associated with the axle housing plus the other steering elements, This model features the tightest turning radius in Mini-Z history. It indicates the Mini-Z 4x4 has excellent handling ability for such a thing which range from casual driving to hard-core crawling.
Tires and wheels which are certain to each model are a significant focus of this Mini-Z 4x4.
steel gears are employed in areas at the mercy of high loads to ensure durability.
The Mini-Z 4x4 features a specially-designed high-torque motor which unique in Mini-Z World. It's optimized for maximum torque, also it develops more energy at lower speeds.
the very best drive effectiveness is achieved utilizing the included set of 18 ball bearings, factory installed to ensure the smoothest most efficient procedure possible, right out of the field.
TECHNICAL DATA
- Length 207.0mm
- Width 88.5mm
- Height 90.0mm
- Chassis Type MX-01
- Wheel Base 120mm
- Tread F/R: 72.7mm
- Weight 242.0g (excl. battery)
- Motor/Engine 130 Class
- Gear Ratio 55.44: 1/46.20: 1/39.60: 1/34.65: 1/30.80: 1/27.72: 1
- Front Tire Diameter ?37.0mm
- Rear Tire Diameter ?37.0mm
- Front Tire Width 12.0mm
- Rear Tire Width 12.0mm
- Battery 4 x AAA alkaline
- Transmitter Syncro KT-531P
- Speed Approx. 2.7km/h?5.4km/h
- Running Time Approx. 60 minutes
KIT CONTENT
- Complete chassis with built-in electronic devices.
- Factory-painted human anatomy filled with many fine details
- KT-531P 2.4GHz transmitter
- Pinion gear set(10T?12T?14T?16T?18T?20T)
- 3 forms of pinion gear spacers
REQUIREMENT TO OPERATE
- 4 x AAA batteries the transmitter
- 4 x AAA batteries for framework (Alkaline or NiMH)
