To bring its powerful performance to more motorists, the MINI-Z AWD has become available in a Readyset. The MA-020 framework features VCS (variable camber suspension system) on the front side that optimizes camber change with suspension swing and a specially created circuit board. The chassis design allows space for setting up the optional gyro product. The gyro can be adjusted by switching a small amount regarding the chassis to mirror the amount of steering correction in reaction to changes in chassis posture, allowing novices to professionals to drive to their full potential. Completely fitted out with accuracy ball bearings, the high drive effectiveness associated with MA-020 chassis is complimented into the Readyset by the unique scale human body and 2.4GHz Syncro KT-531P R/C system that will require no regularity band setting; all at a fantastic value price. Just set the batteries to enjoy the excitement of drift driving utilizing the included group of drift tires. The chassis works with most ASC MINI-Z figures (additional parts perhaps necessary for someone styles). The MINI-Z AWD guarantees a distinctive realm of dramatic race action for you to experience and revel in.
●MINI-Z AWD Readyset centered on MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitivity adjustment function.
●Drift tires are set up as standard.
●Readyset calls for only batteries to be ready to use it!
●Features 2.4GHz Syncro KT-531P transmitter that needs no setup of regularity bands.
●Factory finished human anatomy is sold with display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber relative to suspension system stroke.
●Coil spring on front suspension can be simply changed without tools.
●wide selection of optional parts can be obtained become installed.
●Note) Optional ICS cannot be used. Additionally, this model is particularly designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It really is just appropriate for the unique gyro unit (offered individually).
Nissan Skyline GT-R V.SpecⅡ Nur (R34)
The final inside Skyline GT-R show, the V. Spec II Nur is Nissan’s last R34. To commemorate the Skyline GT-R, this limited-edition has a racing-based tuned motor and wears the unique Millennium Jade color scheme.
Includes fashionable design of Syncro KT-531P transmitter. Features steering / throttle trim plus dual price adjustment of steering angle and control the flashing rate of optional LEDs. Besides, the transmitter has an exercise Mode feature which limits rate of automobile for simple learning (default setting at the time of shipment is knowledge Mode).
Special AWD Sports framework is based on the MA-02 chassis and features the RA45 unit.
Features VCS front suspension that optimizes camber improvement in concert with suspension stroke. Replacement of front suspension system coil springs is not hard without any tools needed.
Equipped with strut-type back suspension system.
Complete bearing specs consist of 14 ball bearings.
Designed with drift tires as standard.
Loaded with special mount room and gyro adjustment volume the optional gyro device (sold individually).
TECHNICAL DATA
- Length 167.0mm
- Width 70.0mm
- Height 46.0mm
- Chassis MA-020-N
- Wheelbase 94.0mm(L)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
/li>- R / C unit built-in complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- Spare nut
- Wheel wrench
- Pinion removal device
REQUIREMENT TO RUN
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
