To create its dynamic performance to even more motorists, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension system) regarding the front that optimizes camber change with suspension system stroke and a specially created circuit board. The framework design enables area for installing the optional gyro unit(offered separately). The gyro could be adjusted by turning a tiny amount on chassis to mirror the quantity of steering modification in reaction to changes in framework posture, permitting beginners to specialists to push for their full potential. Completely fitted down with precision ball bearings, the high drive efficiency of MA-020 framework is complimented in the Readyset by the initial scale body and 2.4GHz Syncro KT-531P R/C system that needs no regularity band environment; all at an excellent value cost. Simply set the batteries to savor the thrill of drift driving with all the included group of drift tires. The framework is compatible with the majority of ASC MINI-Z systems (additional components maybe needed for somebody designs). The MINI-Z AWD promises a unique world of dramatic racing action so that you can experience and enjoy.
●MINI-Z AWD Readyset according to MA-020 chassis.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitiveness adjustment function.
●Drift tires are installed as standard.
●Readyset requires only batteries to be prepared for action!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of regularity bands.
●Factory finished body is sold with display model quality finish.
●Features VCS (variable camber suspension) that adjusts camber prior to suspension system swing.
●Coil springtime on front suspension system can be simply replaced without tools.
●wide selection of optional parts can be obtained to be installed.
●Note) Optional ICS can NOT be used. Also, this model is specifically designed for the KT-531P transmitter. It is really not suitable for the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is just compatible with the special gyro unit (sold individually).
Nissan Skyline GT-R V.SpecⅡ Nür (R34)
The very last in Skyline GT-R show, the V. Spec II Nür is Nissan’s last R34. To commemorate the Skyline GT-R, this limited-edition comes with a racing-based tuned motor.
Includes fashionable design of Syncro KT-531P transmitter. Features steering / throttle trim and twin price adjustment of steering angle and control the blinking speed of optional LEDs. Also, the transmitter has a Training Mode feature which limits speed associated with automobile for effortless learning (default environment during delivery is knowledge Mode).
Unique AWD Sports chassis is based on the MA-02 chassis and features the RA45 unit.
Features VCS front suspension that optimizes camber improvement in concert with suspension swing. Replacement of front suspension system coil springs is easy without tools needed.
Loaded with strut-type back suspension system.
Complete bearing requirements include 14 ball bearings.
Designed with drift tires as standard.
Built with special mount room and gyro modification volume the optional gyro unit (sold separately:Click right here for gyro support).
TECHNICAL INFORMATION
- Length 167.0mm
- Width 70.0mm
- Height 52.0mm
- Wheelbase 98.0mm(LL)
- Tread F : 59.5mm R : 59.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.5mm
- Rear Wheel Offset Narrow +1.5mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
- R / C unit built-in complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion treatment tool
REQUIREMENT TO OPERATE
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
