Tamiya 47349 - XV-01 Chassis Kit Long Damper Spec (re-release of 84375)  [47349]

The 4WD XV-01 framework provides powerful R/C rally driving on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD design with front and rear enclosed gearboxes built with gear differential devices that use fluid to regulate differential action. The box-like primary frame incorporates covers and wheel-well liners to offer superb protection against dust and debris. The 4-wheel double wishbone suspension system ensures a good amount of suspension swing and ground approval and is matched with Rally Block Tires on replica wheels for practical control.

• 1/10 Scale Assembly kit
• Length: 384mm, Width: 185mm. Wheelbase: 257mm
• The chassis has dedicated 3.5mm thick FRP damper remains front and back to enable maximum exploitation of the extensive swing given by included CVA mini oil shock dampers.
• Suspension arm parts are made to enable the vehicle to run optimally making use of ground clearance of 10mm or maybe more, making it ideally-suited to off-road driving.
• The XV-01 framework utilizes a front-motor, belt-driven 4WD design with all the drive belt, battery pack and R/C gear protected from dust and debris by well-placed covers.
• White 16-spoke wheels are combined with rally block tires.
• TRF501X Setting Springs (tricky - White/Blue) are included.
• Suitable for Subaru Impreza WRC Monte Carlo '07 (Item 51289), Subaru Impreza WRC 2008 (product 51364) or Mitsubishi Lancer Evo. X (51376) bodies.
• Rubber Tire, and tread Rally block

Needs:

• 2-channel radio gear
• 7.2 battery & charger
• Polycarbonate paint
• Electronic rate control
• Body Set