Tamiya 56523 - MFC-03 Euro-Style Multi Function Control Unit  [56523]

Tamiya 56523 in addition to multi-function control units which enable different lights, sound and vibration results in Euro-Style. which adds a whole additional layer of realism to driving, gets an update. This device allows transmitter trim levers become coupled with stick control use, meaning you can enjoy lights, noises and vibrations coordinated with actions while driving your R/C tractor truck model.Engine sounds recorded from real European L6 Diesel. Lights, sound and vibration controllable from transmitter. Air sound files expertly recreated. Vibration amounts connected to engine rate for supreme realism. Engine sound modifications when combined to trailer

Specification:

• Features 33 different types of sound, including engine ignition and shutdown, horn, gear modifications, brake system, air sound files etc. A 60mm-diameter full-range speaker in a resin case provides exceptional quality.
• Around 21 actions can be controlled utilizing a 4-channel transmitter. Tamiya/Futaba 4VWD Attack 2.4 GHZ Radio System 4-channel and 4YWD-2.4G are suitable for best compatibility. 
• Light operation and volume modification are also feasible utilizing the transmitter.
• Includes white, red and yellow high brightness LEDs to duplicate vehicle HID lights with precision.
• An ESC is built-in to the device, enabling practical running at really low rates.
• The MFC product is run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, allowing display of lights and sounds just.
• May be used for support leg procedure when using Item 56505 Motorized Support Legs.
• Cannot be utilized together with Item 53909 TLU-01 or Item 53937 TLU-02 Light-emitting Diode light units.
• Needs separately offered 4ch transmitter with slip trims, 4ch receiver and 2 servos (3 if utilizing Item 56505). Tamiya Attack 2.4 GHZ Broadcast System 4-channel recommended for most useful compatibility.
• Sound files x 33 Actions
• Light effects x 16 Actions
• Procedure x 21 Actions
• Mode x 3 Modes
• Vibration Device

MFC-03 Requirements

• Voltage: 6.6-7.2V
• Usable heat : -10 level to 50 level
• Storage Temperature : -20 level to 50 level
• Maximum motor current: 60A
• Usable engines: kit-included Type 540 motor,Tamiya tractor vehicle choice parts engines.

Needed R/C System

• This kit requires these things (not included in kit): a 4ch transmitter (self-neutral stick kind with lever-type 4ch sliding trims), a 4ch receiver, and 2 servos (3 when using with 56505 Motorized Support Legs.)
• Electronic speed controller and receiver battery pack (6V) are not required.
• Suggested R/C transmitter/receiver devices: Futaba ATTACK 4YWD-2.4G / R204 GF-T or Futaba ATTACK 4WD T4VWD/FP-R114H. *Transmitters with click-touch kind trims might cause difficulty when working with with
• Tamiya Multi-Function Control Devices.
• If utilizing transmitter besides those suggested above, make certain that is it self-neutral kind and uses sliding trim levers. Transmitters without any self-neutral system or non-sliding trim levers (age.g. click-touch) may well not understand optimum efficieny.
• Some connectors may not be compatible, or modification might be required.
• Never use with wheel trigger type transmitters or transmitters without trims.
• PCM receiver, multi-channel receivers cannot be combined with this kit.
• Whenever setting up this device into traditional truck models, servo extension cables are required. Use extension cables (sold separately) to make sure cable size exceeds 50cm.