Tamiya 58622-60A - 1/24 Heavy Dump Truck (GF-01) (w/o ESC)  [58622-60A]

• Tamiya 58622 Heavy Dump Track GF-01 chassis
• Reproduce the “heavy dump” active in large-scale construction site realistic!
• Big tire fitted, off-road selling point of 4 x4 unique. Anywhere you operate around in comical happily. An ultra-large vehicles working in large-scale construction internet sites such as for example mines and dam construction ended up being modeled “heavy dump”. A distinctive design into the powerful that besides a dump vehicle traveling regarding the general road, high strength feeling of scale were additionally reproduced in enough ABS resin human anatomy. Cab (cab) together with vessel (the bed) usually it is also feasible to display in state as separate parts, which raised the vessel normally a feature of the dump. The chassis gather a higher popularity in comical and wild trip is used “GF-01 chassis.” Molding color associated with framework not merely the body was also a yellow image of much equipment, it will likely be enjoyable to check finish. The tire built with a large-diameter monster increase tires, design additionally went also crazy, it is appealing is jammed style of pastime RC unique.
• Length: about 350 mm
• overall width: about 270 mm
• Height: about 210mm four-wheel drive GF-01 chassis, equipped with a large tire in
• Square setup built with a motor in the middle of the lightly power adequate monocoque framework, front and back in gear GF-01 chassis that adopted the gear drive 4WD for transmitting capacity to the tires. Almost equal to “square” configuration is the ratio of the wheel base and tread additionally features. Kit case of framework one-piece, closed to shut from sand and pebbles. You create a smooth cornering and an integrated differential gear. Suspension dual wishbone 4-wheel independent built with friction damper. Sets the steering servo towards the chassis left part, it demonstrates the management faculties with no practice by isometric 2-piece tie rod.
• The image is a prototype.

Specifications:

• Scale: 1/24
• Construction kind: Assembly kit
• Terrain use: Multi-Purpose
• Drive-train 4WD
• Drive type: Gearbox
• Drive line: Dog bone
• Differential kind: Gear
• Suspension: Fully separate dual wishbone
• Steering mechanism: Bell-crank
• Shock damper: Friction damper
• Shock damper material: Plastic
• Tire kind: Rubber
• Tire tread: Lug/pin-spike
• Body product: ABS Plastic
• Chassis product: Plastic
• Electronic Speed Control (ESC): never INCLUDED
• ESC model: TBLE-02S
• LED Light buckets: No
• LED lights: No
• Motor: 540-brushed type
• Bearings: Plastic bushing
• Adjustable camber: Fixed
• Adjustable toe perspectives: Front only
• Adjustable ground clearance: Fixed
• Adjustable gear ratio: Fixed
• Adjustable wheelbase: Fixed
• Adjustable track width: Fixed
• Adjustable surprise angle: Fixed
• Special feature 1: Length: 350mm, Width: 270mm, Height: 210mm
• Special feature 2: The realistic injection-molded resin human body features split cab and rear sleep components.
• Special function 3: Alternate rear sleep between flat and raised positions by changing the position regarding the 2 remains and snap pins within the body mounts. Note: it isn't advised to place things into the rear sleep, or drive the model with it elevated.
• Special feature 4: Chassis and deep rim wheel parts are molded in yellow for a traditional appearance.
• Special function 5: The 4WD GF-01 framework provides a fantastic feeling of big scale, and makes use of front and rear differentials in sealed gearboxes incorporated inside frame.
• Special function 6: 4-wheel double wishbone suspension system makes use of friction dampers.
• Special function 7: The &39;square&39; setup chassis makes use of similar tread (194mm) and wheelbase (174mm) lengths.
• Special function 8: Torque-tuned motor is roofed.
• Special feature 9: includes 115mm-diameter tires.
• Requires A: 2-channel radio gear & ESC
• Requires B: 7.2 battery pack & charger