Tamiya 71103 - Mechanical Beetle - Obstacle Evading Type  [71103]

Walks while moving its horn to avoid hurdles this phenomenal beetle-robot walks featuring its four feet while moving its horn. With regards to bumps into an obstacle, it turns around immediately and certainly will continue walking. Horn, legs and body on which the gearbox is installed use transparent-colored parts, giving the beetle a funky look. Reverse switch can also be transparent, providing you with a peek within beetle's internal mechanisms. Installation is simple with use of screws and snap-lock components.

All that's necessary included construction is simple with use of screws and snap-lock parts. Cable ends are plastic capped with cut areas pre-marked for simple wiring.

Walks while swinging its horn A link rod attached to the front side right leg enables the horn to move appropriate and left and when it bumps into an obstacle, the beetle automatically turns in order to avoid it.

Low rate, high rate, option between two gearboxes You can choose between 2 different running speeds. A reverse switch also allows backward movement.

Clear type switch Clear switch with green transparent components adds a very good, futuristic look.

Walking the Beetle operate on flat, smooth surfaces. Avoid operating over slopes or on bumpy roadways. Enclose the beetle in 4 walls to have it run around in the same room.

Basic Requirements

• Total length: 195mm
• Total weight: 110g (w/ out batteries)
• Body product: ABS resin
• 2 feasible different rates.
• Gearbox, engine, reverse switch additionally included.
• Requires one R6/AA/UM3 battery.
• Constant running time with Alkaline battery: 3hrs. at low speed/2hrs. at high rate.