Yokomo B9-SLF270A Front linier shock spring (2.70) for BD9  [B9-SLF270A]

A linear type front spring jointly developed with AXON for BD9.
The standard spring in kit is a progressive key in that your pitch for the winding changes from center to experience a higher feeling of stability and moderate steering faculties, but this linear spring with equal pitch winding is even more effective. Aiming for aggressive steering characteristics, the design is targeted on increasing steering reaction and cornering. Even though there is a balance involving the front side and rear settings, you can suppress understeer and aggressively strike the inside.
Furthermore, the entire size is 1.5mm reduced than formerly released linear springs, generally there isn't any must alter the shock end whenever decreasing the car height. Depending on the style of tire, it could be tough to lower the car height because depth, so with regards to the situation, it can be used not merely the front side but in addition for a corner.

Supported Chassis
MRTC-BD715B / MRTC-BD715O / MRTC-BD715S / MRTC-BD716 / MRTC-BD716H / MRTC-BD716O / MRTC-BD716S / MRTC-BD8 / MRTC-BD8A / MRTC-BD8-P / MRTC-BD8AP / MRTC-BD8SV / MRTC-BD10 / MRTC-BD10A / MRTC-BD10LC / MRTC-BD10LCA / MRTC-BD10LCR / MRTC-BD10LCRA / MRTC-BD919 / MRTC-BD919S / MRTC-BD10FF / MRTC-BD11-1 / MSR-BD11 / MRTC-BD11US / MRTC-BD11A-1 / MSR-BDFWD