The drift servo program card is currently available, that is designed with a steering hunting suppression function and further enhances the functions for the drift-specific servo, which will be now needed for competitive RWD drift vehicles!
Adjust the power, torque, hunting suppression, and neutral width values, and in addition recognize a servo-operated reverse function. Even though standard performance of SP-03D and SP-02DV2 is sufficient, detail by detail settings are designed to meet up with the needs of expert drivers who require much more delicate operation.
For instance, if the driver himself really wants to raise the feeling of procedure, or if the machine is well-balanced and there's no need to raise the searching suppression ground, raise the power and torque to offer a far more direct feeling of operation. However, in severe situations including chasing races (such as for instance when you need to boost the gyro gain value), you can easily adjust the steering traits according to the situation, such as reducing the power and torque and increasing the hunting suppression value. You'll be able to pull it away.
The key device comes with a servo connection slot and an electric port. For power supply, you can make use of a BEC power supply including an ESC or receiver, or perhaps you can link it from a computer or mobile battery with a micro USB connector. A connector cord for BEC power connection normally included.
*Connecting a BEC power source and a micro USB energy source at the same time will damage the ESC's BEC circuit and program card circuit, so please never ever link two types of power sources at exactly the same time.
Supported Chassis
SDR-020 / SDR-020P / SDR-020R / MDR-020 / MDR-020BL / MDR-020P / MDR-020R< /p>
