Yokomo Y2-415ART Teams Aluminum 3-piece rear hub carrier set for YD-2  [Y2-415ART]

This might be an aluminum rear hub provider you can use in keeping with the YD-2 series. Using a universal shaft with a quick axle axis for narrow scrubs and setting the universal joint pin as far outside as you can, going it nearer to the outer suspension supply pin activates the suspension system motion and enables more direct movement. It is. Traditional universal shafts may also be used by adding spacers, to help you have the huge difference in movement with respect to the combination.
This backside hub provider set is characterized by the capacity to find the mounting place associated with the upper/lower arm, by making the upper part a different part, the size of top of the arm could be changed variably, as well as the contact area when rolling. It is possible to control changes and it is a successful setting point particularly on roadways such as P tiles. The mounting height associated with the reduced arm can be chosen from 4 positions, which significantly expands the product range of roll center settings, which makes it ideal for adjusting the weight across the back.

* if you are using the best suspension system supply mounting gap, the suspension system arm and also the within the wheel may interfere with respect to the type of wheel.
All mounting roles are for sale to Racing Performer RP-6313 series tires.

Supported Chassis
SDR-020 / SDR-020P / SDR-020R