this might be a dummy braking system disc and caliper set that can be used commonly for many YD-2 show cars. The braking system disc is incorporated utilizing the hexagonal hub for mounting the wheel, not to mention rotates using the wheel. Three kinds of hub depth are included: 5.5mm, 6.5mm, and 8.0mm, to help you freely adjust the tread width and scrub radius. Alternatively, the gunmetal color brake calipers are fixed regarding the front and rear knuckles, giving it a realistic appearance just like the real vehicle while driving. The brake discs and calipers peeking through the gaps between the tires give the machine a great boost. The set also incorporates a resin steering block and backside hub carrier, which make it simpler to install the caliper, as they are shaped to match the most recent settings. The suitable trail and kingpin angle for the steering block are set on the basis of the framework associated with actual automobile, boosting the appearance during countersteering while also enhancing steering reaction. The steering stopper and connect pole mounting place are also modified towards the latest specifications, causing smooth operation when increasing the steering angle. The rear hub carrier has an extra upper supply mounting position, and the selection of settings for roll center and ground camber modifications was increased, allowing settings that earnestly utilize roll. Especially on roadways with low grip such as P-tiles, the top of supply is mounted higher to maintain the floor contact area if the chassis rolls, ensuring stable lateral grip and attaining aggressive driving. .
Copyright © 2008-2024 rcjaz.com All rights reserved